EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a remarkably efficient solar controller designed for off-grid solar techniques. Based on multiphase synchronous rectification engineering, it guarantees optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Vital Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technology for superior solar Strength harvesting. Vital options incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Superior MPPT Algorithm with >ninety nine% performance.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Display with genuine-time info monitoring.
Numerous Load Manage Modes such as manual and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, shorter circuits, and reverse polarity.
Step-by-Step Guideline to Starting the EPEVER Tracer AN Collection Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry location near the battery financial institution.
Secure the Tracer AN controller using the supplied mounting brackets.
Preserve proper clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Often adhere to proper protection protocols and make sure the program is powered off right before connecting factors.
Action 1: Connect the battery terminals to your cost controller (good to positive, negative to negative).
Step two: Link the photo voltaic panel array to your PV input terminals.
Stage three: Hook up the load terminals if employing a immediate load connection.
Step four: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Options
Power within the controller by connecting the battery initial.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Manual, timer, light-weight Management.
5. Checking and Info Logging
The Tracer AN Sequence supports true-time checking utilizing the MT50 remote meter.
Knowledge can be logged by way of the RS485 interaction port utilizing computer software for example Photo voltaic Station Computer system.
Remote monitoring is achievable with the EPEVER WiFi module.
6. Troubleshooting Frequent Difficulties
Challenge one: No Ability Output
Check battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Concern 2: Around-Voltage Protection
Verify the photo voltaic array’s voltage rating.
Regulate method parameters if Read more required.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT settings within the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological know-how guarantees:
Bigger Performance: Lowered Electrical power losses for the duration of conversion.
Increased Dependability: Stable functionality less than variable loads.
Extended Battery Existence: Constant and precise charging profiles.
Summary
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification engineering is really an Outstanding option for optimizing solar energy generation and lengthening battery lifetime. By next the above setup manual, end users can be certain maximum effectiveness and system longevity.